Dissolve the Solvy. Air dry. Press. Thread the top and bobbin with Sulky Clear Invisible Thread. With brick fabric face down on the table, center batting and lining fabric (right side up) over it, spraying each layer with KK 2000 to hold them firmly while stitching. Straight stitch quilt (either free-motion or with feed dogs up) on the horizontal mortar lines in the brick fabric print.
1. Fold over the ends of the brick fabric twice and edge stitch them to the lining fabric using Sulky Clear Invisible Thread on the top and in the bobbin. Place the book over the lining fabric side and fold flaps in. Mark fold lines with a chalk marker. Remove the book. Fold the flaps in the opposite direction so brick fabric is against brick fabric. Pin in place.
2. Thread serger with burgundy sewing thread and serge a 1/4” seam along long edges. If a serger is not available, use a close zig-zag stitch at a medium width setting. Fold flaps right side out again. Turn the remaining serged edge toward the lining fabric and straight stitch it down using Sulky Clear Invisible Thread.
3. Place the book into the book cover and enjoy! Other Options: You could make your own personal ownership label and sew it onto the lining; a ribbon could be added for a book mark.

THREAD CROSS REFERENCE HOME PAGE | Retailer Locator | ADD YOUR STORE TO THE RETAILER LOCATOR THREAD | STABILIZERS | BOOKS | PUFFY FOAM | TRANSFER PENS | EMBROIDERY CARDS STORAGE BOXES | ADHESIVES | ORDERING | FAQ'S | PROJECTS | SEMINARS SULKY PROJECTS ON PBS-TV | INTERNATIONAL CUSTOMERS

Look for Sulky products at sewing, quilting, and craft stores all over the United States and Canada Sulky of America 980 Cobb Place Blvd., Suite 130 Kennesaw, GA 30144 Phone: 800-874-4115 Fax: 770-429-3987 info at sulky.com Copyright© 1997-2008 Sulky® of America